[gnome-bluetooth] Bluetooth problem under FC3 with Dell D600

[Cristian Tapus]

I have tried to get the bluetooth running under FC3 for the last 2
days without any luck. The laptop can not detect any bluetooth device,
nor is detected by any other device (phone, mac)

Here is my setup:

[crt at dhcp-44-206 ~]$ lsmod
Module                  Size  Used by
rfcomm                 37853  0
hci_usb                15945  3
hidp                   26817  2
l2cap                  26053  10 rfcomm,hidp
bluetooth              48453  10 rfcomm,hci_usb,hidp,l2cap

[crt at dhcp-44-206 ~]$ hciconfig -a
hci0:   Type: USB
       BD Address: <addr> ACL MTU: 192:8  SCO MTU: 64:8
       UP RUNNING PSCAN ISCAN
       RX bytes:10530 acl:0 sco:0 events:469 errors:0
       TX bytes:1162 acl:0 sco:0 commands:133 errors:0
       Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80
       Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
       Link policy: RSWITCH HOLD SNIFF PARK
       Link mode: SLAVE ACCEPT
       Name: <name>
       Class: 0x120104
       Service Classes: Networking, Object Transfer
       Device Class: Computer, Desktop workstation
       HCI Ver: 1.2 (0x2) HCI Rev: 0x4f2 LMP Ver: 1.2 (0x2) LMP Subver: 0x4f2
       Manufacturer: Cambridge Silicon Radio (10)

When I do hcitool scan here is what I get:
[crt at dhcp-44-206 ~]$ hcitool scan
Scanning ...
[crt at dhcp-44-206 ~]$

The hcidump associated with this is:
[crt at dhcp-44-206 ~]$ hcidump
HCIDump - HCI packet analyzer ver 1.11
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Inquiry Complete (0x01) plen 1

Any ideas what I am doing wrong? If you need extra information please
let me know.

Cheers,

Cristian