[gnome-bluetooth] failure at "hcitool scan" ("hcitool dev" still OK)

[Matjaz Vencelj]

Hi!

(This is similar to the July "GNOME-BLUETOOTH ON FEDORA" thread. That 
one died off however, and we do not know if the initiator got it working 
or not...)

Running a fresh install of FC4 with 2.6.14-1.1637_FC4 kernel on an i586, 
I'm trying to see a Logitech Mobile Freedom bluetooth headset through a 
USB bluetooth adapter. This same adapter/headset pair works well on a 
Windows98 PC.

I followed the instructions in 
http://www.gurulabs.com/goodies/Using_Linux_and_Bluetooth_DUN_with_the_Treo650.php 
up to the "hcitool scan" point, meaning that I have the software and 
that I point to a custom pin-script. The system can see my USB Bluetooth 
adapter:
         $ hcitool dev
         Devices:
                 hci0    00:0E:A1:32:9E:1F
but cannot connect to the headset:
         $ hcitool scan
         Scanning ...
         Inquiry failed: Connection timed out
no matter whether I turn on the headset in the normal or in the 
"pairing" mode.

I then did a
# hciconfig -a
hci0:   Type: USB
    BD Address: 00:0E:A1:32:9E:1F ACL MTU: 377:10 SCO MTU: 16:0
    UP RUNNING PSCAN ISCAN INQUIRY
    RX bytes:1209 acl:0 sco:0 events:25 errors:0
    TX bytes:338 acl:0 sco:0 commands:25 errors:0
    Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
    Link policy:
    Link mode: SLAVE ACCEPT
    Name: 'BlueZ'
    Class: 0x000000
    Service Classes: Unspecified
    Device Class: Miscellaneous,
    HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x6965
    Manufacturer: Broadcom Corporation (15)

And this is as far as I can walk alone. :(
The RX and TX do keep increasing....

Any ideas what I should do?

Thanks,
Matjaz