<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.0.10">
</HEAD>
<BODY>
Hi, I've got a Z600 setup with gnome bluetooth on my Gentoo laptop, and it pretty much just worked.<BR>
I ran hcitool info to have a look at its coming back the same as yours with code 0x00, but that has not affected me before, i can use all the bluetooth features, file transfer, dial up networking, xmms remote etc.<BR>
<BR>
Running sdptool gave me a different result from you, so there must be a problem somewhere (see below) <BR>
<BR>
I dont know alot about phones or bluetooth, I just follow the guides and mailing list and learn as I go, but I do have the same phone as you and know it works, so if there is any info you want me to check that would help you, just gimme a shout.<BR>
<BR>
Grib<BR>
<BR>
***********************************************************************<BR>
<BR>
root@beatrice grib # sdptool browse 00:0A:D9:D4:DD:F7<BR>
Browsing 00:0A:D9:D4:DD:F7 ...<BR>
Service Name: Dial-up Networking<BR>
Service RecHandle: 0x10000<BR>
Service Class ID List:<BR>
"Dialup Networking" (0x1103)<BR>
"Generic Networking" (0x1201)<BR>
Protocol Descriptor List:<BR>
"L2CAP" (0x0100)<BR>
"RFCOMM" (0x0003)<BR>
Channel: 1<BR>
Profile Descriptor List:<BR>
"Dialup Networking" (0x1103)<BR>
Version: 0x0100<BR>
<BR>
Service Name: Voice gateway<BR>
Service RecHandle: 0x10002<BR>
Service Class ID List:<BR>
"Headset Audio Gateway" (0x1112)<BR>
"Generic Audio" (0x1203)<BR>
Protocol Descriptor List:<BR>
"L2CAP" (0x0100)<BR>
"RFCOMM" (0x0003)<BR>
Channel: 3<BR>
Profile Descriptor List:<BR>
"Headset" (0x1108)<BR>
Version: 0x0100<BR>
<BR>
Service Name: Serial Port 1<BR>
Service RecHandle: 0x10003<BR>
Service Class ID List:<BR>
"Serial Port" (0x1101)<BR>
Protocol Descriptor List:<BR>
"L2CAP" (0x0100)<BR>
"RFCOMM" (0x0003)<BR>
Channel: 4<BR>
<BR>
Service Name: Serial Port 2<BR>
Service RecHandle: 0x10004<BR>
Service Class ID List:<BR>
"Serial Port" (0x1101)<BR>
Protocol Descriptor List:<BR>
"L2CAP" (0x0100)<BR>
"RFCOMM" (0x0003)<BR>
Channel: 5<BR>
<BR>
Service Name: OBEX Object Push<BR>
Service RecHandle: 0x10005<BR>
Service Class ID List:<BR>
"OBEX Object Push" (0x1105)<BR>
Protocol Descriptor List:<BR>
"L2CAP" (0x0100)<BR>
"RFCOMM" (0x0003)<BR>
Channel: 10<BR>
"OBEX" (0x0008)<BR>
Profile Descriptor List:<BR>
"OBEX Object Push" (0x1105)<BR>
Version: 0x0100<BR>
<BR>
Service Name: IrMC Synchronization<BR>
Service RecHandle: 0x10006<BR>
Service Class ID List:<BR>
"IrMCSync" (0x1104)<BR>
Protocol Descriptor List:<BR>
"L2CAP" (0x0100)<BR>
"RFCOMM" (0x0003)<BR>
Channel: 11<BR>
"OBEX" (0x0008)<BR>
Profile Descriptor List:<BR>
"IrMCSync" (0x1104)<BR>
Version: 0x0100<BR>
<BR>
Service Name: HF Voice gateway<BR>
Service RecHandle: 0x10007<BR>
Service Class ID List:<BR>
"" (0x111f)<BR>
"Generic Audio" (0x1203)<BR>
Protocol Descriptor List:<BR>
"L2CAP" (0x0100)<BR>
"RFCOMM" (0x0003)<BR>
Channel: 6<BR>
Profile Descriptor List:<BR>
"" (0x111e)<BR>
Version: 0x0100<BR>
<BR>
Service Name: OBEX Basic Imaging<BR>
Service RecHandle: 0x1000b<BR>
Service Class ID List:<BR>
"" (0x111b)<BR>
Protocol Descriptor List:<BR>
"L2CAP" (0x0100)<BR>
"RFCOMM" (0x0003)<BR>
Channel: 15<BR>
"OBEX" (0x0008)<BR>
Profile Descriptor List:<BR>
"" (0x111a)<BR>
Version: 0x0100<BR>
<BR>
Service Name: OBEX File Transfer<BR>
Service RecHandle: 0x1000f<BR>
Service Class ID List:<BR>
"OBEX File Transfer" (0x1106)<BR>
Protocol Descriptor List:<BR>
"L2CAP" (0x0100)<BR>
"RFCOMM" (0x0003)<BR>
Channel: 7<BR>
"OBEX" (0x0008)<BR>
Profile Descriptor List:<BR>
"OBEX File Transfer" (0x1106)<BR>
Version: 0x0100<BR>
<BR>
<BR>
On Wed, 2004-05-26 at 20:49, Michael Friis wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE><FONT COLOR="#737373"><I>It's me again with the Sony-Ericsson Z600. I can't transfer files from the
laptop to the phone, nor can I pair the phone up with the laptop from the
phone. I've tried to provide some more info so that maybe some of you guys
can point me in the direction of the problem. I find it worrying that
several of the features reported by "hcitool info" have code 0x00. Is this
normal? Are there other anomalies? Are there other ways to get info on whats
going on when I try to do various stuff?
Regards
Michael
sprinkle root # hcitool info 00:0A:D9:B1:C1:72
Requesting information ...
BD Address: 00:0A:D9:B1:C1:72
Device Name: Michael
SE Z600
LMP Version: 1.1 (0x1) LMP Subversion: 0x503
Manufacturer: Ericsson Mobile Comunications (0)
Features: 0x04 0xca 0x31 0x00 0x00 0x00 0x00 0x00
<encryption> <RSSI> <SCO link> <u-law log>
<A-law log> <CVSD>
sprinkle root #
(corresponding output from hcidump below this line)
==============================
sprinkle root # hcidump
HCIDump - HCI packet analyzer ver 1.8
device: hci0 snap_len: 1028 filter: 0xffffffff
>HCI Event: Auth Complete(0x06) plen 3
< HCI Command: Remote Name Request(0x01|0x0019) plen 10
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Remote Name Req Complete(0x07) plen 255
< HCI Command: Read Remote Version Information(0x01|0x001d) plen 2
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Read Remote Ver Info Complete(0x0c) plen 8
< HCI Command: Read Remote Supported Features(0x01|0x001b) plen 2
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Read Remote Supported Features(0x0b) plen 11
#####################################################
sprinkle root # hcitool inq 00:0A:D9:B1:C1:72
Inquiring ...
00:0A:D9:B1:C1:72 clock offset: 0x079a class: 0x520204
sprinkle root #
(corresponding output from hcidump below this line)
=================
< HCI Command: Inquiry(0x01|0x0001) plen 5
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Inquiry Result(0x02) plen 15
>HCI Event: Inquiry Complete(0x01) plen 1
##########################################
sprinkle root # sdptool browse 00:0A:D9:B1:C1:72
Browsing 00:0A:D9:B1:C1:72 ...
Service Search failed: Connection timed out
sprinkle root #
(corresponding output from hcidump below this line)
=============
< HCI Command: Create Connection(0x01|0x0005) plen 13
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Connect Complete(0x03) plen 11
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Command Complete(0x0e) plen 6
>ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0043 scid 0x0040 result 0 status 0
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0043 flags 0x0000 clen 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 251
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0043 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 24
L2CAP(d): cid 0x43 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1002 (PubBrwsGrp)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0043 scid 0x0040
#############################
<Pairing from phone attempted, pin entered>
(corresponding output from hcidump below this line)
=================
>HCI Event: Connect Request(0x04) plen 10
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: PIN Code Request(0x16) plen 6
# Phone reports that the connectionattempt failed, some time elapses
>HCI Event: Connect Complete(0x03) plen 11
---
"I'm the Nightrider. I'm a fuel-injected suicide machine. Sent down to
strike the unroadworthy! I'm hotter than a rollin' dice. Step right up and
watch the kid lay down a rubber road right to freedom."
- Nightrider in Mad Max
_________________________________________________________________
F alle de nye og sjove ikoner med MSN Messenger </FONT><A HREF="http://www.msn.dk/messenger"><U>http://www.msn.dk/messenger</U></A>
<FONT COLOR="#737373">
_______________________________________________
gnome-bluetooth mailing list
gnome-bluetooth@usefulinc.com</FONT>
<A HREF="http://lists.usefulinc.com/mailman/listinfo/gnome-bluetooth"><U>http://lists.usefulinc.com/mailman/listinfo/gnome-bluetooth</U></A>
<FONT COLOR="#737373"></I></FONT></PRE>
</BLOCKQUOTE>
</BODY>
</HTML>