[gnome-bluetooth] Unable to make a bluetooth connection - Nokia 6230
Stefan Radomski
sr at oop.info
Thu May 27 23:21:42 BST 2004
Hi there,
I installed your gnome-bluetooth debian packages and
gnome-bluetooth-admin finds my Nokia 6230 just fine. It also shows up in
bluetooth:/// from nautilus, but whenever I try to access it (with a
double-click), I get the message "Unable to make a Bluetooth connection".
To be exact, I am only getting this message if I double-click again
right after the first double-click, but that may be unrelated. I get no
error message at all if I double-click just once.
"gnome-obex-send --dest 00:E0:03:3A:CA:74 file.png" works just fine.
I looked through the archive of this mailinglist, and
http://lists.usefulinc.com/pipermail/gnome-bluetooth/2003-August/000028.html
seems related, I am however hesitant to install the cvs snapshot for
openobex, as I hope to get it working with the debian packages.
I made a hcidump while trying to access my cellphone from nautilus,
please let me know if there is anything else I can do.
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection(0x01|0x0005) plen 13
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Link Key Request(0x17) plen 6
< HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> HCI Event: Command Complete(0x0e) plen 10
> HCI Event: Connect Complete(0x03) plen 11
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Command Complete(0x0e) plen 6
> HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
> HCI Event: Max Slots Change(0x1b) plen 3
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 1024
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 32772
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 18 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size
1019 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 18 frame_type 0 credit_flow 14 pri 7 ack_timer 0 frame_size
324 max_retrans 0 credits 0
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 18 pf 1 ilen 0 fcs 0x32
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 18 pf 1 ilen 0 fcs 0xf9
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 18 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 18 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 18 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> ACL data: handle 0x0029 flags 0x02 dlen 9
L2CAP(d): cid 0x40 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 18 pf 1 ilen 0 fcs 0x8
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 18 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 9
L2CAP(d): cid 0x40 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 1 ilen 0 fcs 0xd2
< ACL data: handle 0x0029 flags 0x02 dlen 24
L2CAP(d): cid 0x40 len 20 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 16 fcs 0xce
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(d): cid 0x40 len 12 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 18 pf 1 ilen 7 fcs 0x8
< ACL data: handle 0x0029 flags 0x02 dlen 11
L2CAP(d): cid 0x40 len 7 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 3 fcs 0xce
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 18 pf 1 ilen 3 fcs 0x8
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 18 pf 1 ilen 0 fcs 0xd3
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 18 pf 1 ilen 0 fcs 0xf9
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
< HCI Command: Disconnect(0x01|0x0006) plen 3
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Disconn Complete(0x05) plen 4
tia
Stefan
--
"boredom is not a burden anyone should bear"
More information about the gnome-bluetooth
mailing list